NITROUS OXIDE ( nos / n2o ) advice forum

Nitrous Oxide ( NOS / N20 ) Forum
 
It is currently Mon Oct 14, 2019 3:15 am

All times are UTC




Post new topic Reply to topic  [ 25 posts ] 
Author Message
 Post subject: Nitrous turbo chop
PostPosted: Fri Nov 30, 2012 4:21 pm 
Offline
Learner

Joined: Fri Nov 30, 2012 4:37 am
Posts: 24
Location: Northants
Evenin' all, recently I had a WON nitrous kit come into my position. I swapped it with a friend who had his eye on my vance and Hines pro pipe exhaust, so figure I should probably join here and when it comes to fitting I can double check here, a flick through the instructions sounds simple enough. I gotta get the turbo on and make a plenum chamber yet before I can start, will have a read through posts on here to avoid asking daft questions in the future.

Image
Image
Image

I know, I need a w.o.n decal for that bottle!


Top
 Profile  
Reply with quote  

Advertisement

Wizards of NOS Nitrous Oxide Systems
 Post subject: Re: Nitrous turbo chop
PostPosted: Fri Nov 30, 2012 7:58 pm 
Offline
Learner

Joined: Sat May 07, 2011 6:34 pm
Posts: 231
Location: Cheshire
bike looks like a great project... but i fear for your chin(s) with those handlebars!

you did the right thing coming here. best advice there is. but i'll start with.....

it's worth sending the pulsoids to WON for a once over. There shouldn't be anything wring with them but can you ever really trust the previous owners not to have done something daft?

_________________
I ride too fast to worry about cholesterol
11.47 @ 129.17 14/09/13


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Sat Dec 01, 2012 1:03 am 
Offline
Site Admin

Joined: Thu Feb 03, 2005 6:07 pm
Posts: 18701
Location: Doncaster
welcome to my forum and it sounds like you've got a lot of work to do before you'll need my help but I'll be available when you do need me.

_________________
Regards

Trev (The WIZARD of NOS)

30 years of nitrous experience and counting!!!!


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Mon Dec 10, 2012 6:00 am 
Offline
Learner

Joined: Fri Nov 30, 2012 4:37 am
Posts: 24
Location: Northants
Not too far to go, once the plenum is made I can start the pipe work and get the turbo set up.

Intact no ill need to make sure the venom injectors are able to go to the plenum. - where would be best to put them... The 4 fuel ones need to go so that they are pointing straight toward the intake ports and that leaves me with the one nitrous injector with a deflector where would I put that?


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Mon Dec 10, 2012 12:18 pm 
Offline
Site Admin

Joined: Thu Feb 03, 2005 6:07 pm
Posts: 18701
Location: Doncaster
Put the fuel Venoms as close to the inlet valves as possible and locate the nitrous Venom in the outlet of the turbo.

_________________
Regards

Trev (The WIZARD of NOS)

30 years of nitrous experience and counting!!!!


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Mon Dec 10, 2012 2:51 pm 
Offline
Learner

Joined: Fri Nov 30, 2012 4:37 am
Posts: 24
Location: Northants
Sorry should have mentioned this is a blow through, not a draw through setup
So if I drill out the carb rubbers for the fuel venoms that would be best, let me quickly draw a pic to avoid confusion


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Mon Dec 10, 2012 3:21 pm 
Offline
Learner

Joined: Fri Nov 30, 2012 4:37 am
Posts: 24
Location: Northants
Image

from the diagram, do i want my fuel venoms where i have marked, driloled into the intake boots

and the nitrous venom i think wants to go in the plenum? the problem i see is that as there is only 1 nitrous venom, it would sit central to the ports so inbetween 2 and 3 cylinder, but would that not mean that cylinder 2 and 3 will have more delivered than 1 and 4 ... would i be better to get another nitrous venom and split the line into two sitting the venoms between 1 and 2 and the other between 3 and 4. or am i way off?


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Mon Dec 10, 2012 4:33 pm 
Offline
Learner

Joined: Fri Nov 30, 2012 4:37 am
Posts: 24
Location: Northants
Image

whats the 2 connectors for? i dont need those do i?

and also are my solenoids ok mounted this way
Image


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Tue Dec 11, 2012 9:47 pm 
Offline
Learner

Joined: Fri Nov 30, 2012 4:37 am
Posts: 24
Location: Northants
Anybody ? ...


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Tue Dec 11, 2012 10:23 pm 
Offline
Learner

Joined: Sat May 07, 2011 6:34 pm
Posts: 231
Location: Cheshire
i'm no expert but i don't think it matters too much. pipe length and no sharp bends are more important. a knowledgeable person soon will put me right if i'm not.


i also think there are some fitting instructions on the website, have you looked? (i haven't)


edit: i did just look and cant find it, that is not to say it's not there.

_________________
I ride too fast to worry about cholesterol
11.47 @ 129.17 14/09/13


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Wed Dec 12, 2012 1:21 pm 
Offline
Learner

Joined: Fri Nov 30, 2012 4:37 am
Posts: 24
Location: Northants
It's placement of the venoms I'm more concerned with, don't wanna drill out any holes then log back in here and someone says no don't put those there lol

Edit; I've found the mounting instructions I have answer


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Wed Dec 12, 2012 2:22 pm 
Offline
Learner

Joined: Fri Nov 30, 2012 4:37 am
Posts: 24
Location: Northants
So... Ill put my fuel venoms in the intake boots after the carb and the nitrous venom, there is no way of getting it in a sealed plenum with the deflector on, so I will mount it in the boost pipe before it enters the plenum, this should aid a better even distribution of nitrous too


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Wed Dec 12, 2012 4:36 pm 
Offline
Learner

Joined: Sat May 07, 2011 6:34 pm
Posts: 231
Location: Cheshire
have you considered direct port?

i've pictures on here of mine somewhere

_________________
I ride too fast to worry about cholesterol
11.47 @ 129.17 14/09/13


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Wed Dec 12, 2012 4:48 pm 
Offline
Learner

Joined: Fri Nov 30, 2012 4:37 am
Posts: 24
Location: Northants
With the fuel and 4 nitrous venoms on the intake boot? I'd like to see pics


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Wed Dec 12, 2012 5:09 pm 
Offline
Learner

Joined: Sat May 07, 2011 6:34 pm
Posts: 231
Location: Cheshire
Image

Image

Image

_________________
I ride too fast to worry about cholesterol
11.47 @ 129.17 14/09/13


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Wed Dec 12, 2012 5:14 pm 
Offline
Learner

Joined: Fri Nov 30, 2012 4:37 am
Posts: 24
Location: Northants
Do won offer a mixer injector like nos or nx where the fuel an nitrous tube go into the one injector?


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Wed Dec 12, 2012 5:17 pm 
Offline
Learner

Joined: Sat May 07, 2011 6:34 pm
Posts: 231
Location: Cheshire
Drop me a PM and i'll send you the link to my photobucket album. saves cluttering up your thread.

_________________
I ride too fast to worry about cholesterol
11.47 @ 129.17 14/09/13


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Wed Dec 12, 2012 6:42 pm 
Offline
Learner

Joined: Fri Nov 30, 2012 4:37 am
Posts: 24
Location: Northants
110 quid for a dblock and 3 extra injectors,


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Mon Dec 17, 2012 5:57 am 
Offline
Learner

Joined: Fri Nov 30, 2012 4:37 am
Posts: 24
Location: Northants
Anybody else see those cross fires on eBay. 4 cross fire injectors, 4 way combo d-block all nylon hose .... Basically it was ready to attach to the pulsoids and your kit was complete!! 101.50 it all sold at!! I was bidding and my comp buggered me at the last few seconds! I mean that little lot is probably 300 new! I didn't want to go over 110 with my bids but was gutted when I couldn't get the last bid in


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Mon Dec 17, 2012 8:50 pm 
Offline
Learner

Joined: Fri Nov 30, 2012 4:37 am
Posts: 24
Location: Northants
Look correct?
Image

Image


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Mon Dec 17, 2012 10:51 pm 
Offline
Learner

Joined: Sat May 07, 2011 6:34 pm
Posts: 231
Location: Cheshire
i think your black plastic bit is on upside down.

(if yours isn't mine are!)

and the fuel one can be closer to the side

_________________
I ride too fast to worry about cholesterol
11.47 @ 129.17 14/09/13


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Tue Dec 18, 2012 4:43 pm 
Offline
Learner

Joined: Fri Nov 30, 2012 4:37 am
Posts: 24
Location: Northants
Image


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Tue Dec 18, 2012 11:22 pm 
Offline
Learner

Joined: Sat May 07, 2011 6:34 pm
Posts: 231
Location: Cheshire
make sure the distrubution blocks are horizontal - looking good.

when you getting rid of that white piece of tin around and under the carbs?

_________________
I ride too fast to worry about cholesterol
11.47 @ 129.17 14/09/13


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Wed Dec 19, 2012 12:32 am 
Offline
Learner

Joined: Fri Nov 30, 2012 4:37 am
Posts: 24
Location: Northants
http://item.mobileweb.ebay.co.uk/viewit ... 0783366872
Pick yourself one up ;)


Top
 Profile  
Reply with quote  
 Post subject: Re: Nitrous turbo chop
PostPosted: Sun Feb 03, 2013 5:43 pm 
Offline
Learner

Joined: Wed Oct 28, 2009 10:20 pm
Posts: 463
Location: Sunny Norfolk
Shame i didnt spot this one sooner, on gsxr's, there loads of room on the underside of the intake part of the head to fit injectors. I run 4 x-fires drilled and tapped directly in to the head. If i want to run without then M10x1.0mm bung x 4 and all sorted.
However, they will work fine mounted in the rubbers, just make sure they seal properly under boost as you dont want any boost leaks, if you can blank your system off somewhere and pressure it with a pump or airline and spray or brush soapy water around the injector bases to make sure they're sealed :)

_________________
GSXR1340 8.50/9.50 ACU DRAGBIKE
GSXR1216 9.50 ACU DRAGBIKE

Is it possible to own too many hammers????


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 25 posts ] 

All times are UTC


Who is online

Users browsing this forum: Google [Bot] and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

  • Advertisement
Wizards of NOS Sparkplugs
Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group  
Design By Poker Bandits