NITROUS OXIDE ( nos / n2o ) advice forum
http://nitrous-advice.org/

Nitrous with hilborn m.f.i on methanol
http://nitrous-advice.org/viewtopic.php?f=12&t=7353
Page 1 of 1

Author:  muppetracer [ Tue Dec 02, 2014 7:08 pm ]
Post subject:  Nitrous with hilborn m.f.i on methanol

I have hilborn mechanical injection running methanol, on my zzr1100 kawasaki ,I would like to add 150 hp with nitrous, should I use race gas/nitrous or methanol/nitrous. At the moment I have a pair of w.o.n pulseoids and a single crossfire wet fuel/nitrous nozzle . Thinking maybe fabricating an air box with single air inlet and mount the nozzle there ?

Author:  Noswizard [ Sat Dec 06, 2014 3:32 pm ]
Post subject:  Re: Nitrous with hilborn m.f.i on methanol

Methanol fuel with the nitrous will be fine but you'll need to flush the fuel Pulsoid out every few races, as it will react with the body and corrode otherwise.

I suggest you buy 3 more Crossfires & D-Block/s etc. and convert what you have to a DP system, as adding fuel at a single point in an induction system, isn't as good as DP.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/