| NITROUS OXIDE ( nos / n2o ) advice forum http://nitrous-advice.org/ |
|
| Put a 35 wet shot on my harley pro street http://nitrous-advice.org/viewtopic.php?f=12&t=7555 |
Page 1 of 1 |
| Author: | Boyceprostreet96 [ Thu Apr 05, 2018 2:04 pm ] |
| Post subject: | Put a 35 wet shot on my harley pro street |
First time using spray, have a question about timing My harley evo is a fairly healthy build , std dual plug heads Std cases , bigbore / stroked etc, my question is for a 35 shot Do I need to retard ignition? Iam using a dyna2000i that has a retard setting Iam at 35 degrees total , should I retard by 4 degrees? Still 3 feet snow on the ground so trying to get everything Ready for spring , any help will be greatly appreciated |
|
| Author: | Noswizard [ Sun Apr 29, 2018 9:49 pm ] |
| Post subject: | Re: Put a 35 wet shot on my harley pro street |
Very sorry for the slow response but I'm here to answer your question now. If you had not had a twin plug head you wouldn't have needed to retard the timing at all on such a small power increase. However, although it's 'tolerable' to have 2 flame fronts collide in a NA motor, it's less than ideal to do so on a nitrous motor, so I would certainly advise you to retard the timing by at least a couple of degrees, just to be safe. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|