Hi Everybody,
I'm Brice from Belgium, pro builder of performances bikes.
I'm now finishing a drag bike for 200m series. Besed on a Yamaha MT-07 Engine. Twin Cylindre.
I have some trouble with the connection of Max Extreme V2. I can not have the RPM infos.
So i have try to connect the controler to one of the spark wire to get a signal but nothing appear on the screen.
I also tryed from the 2 wires comming from the ecu (supposed to send the signal to the original tachometer) but nothing append.
So for the moment i only have the trottle position ok. The Nos pressure also.
Every good advice is really welcome.
One other point is:
For the champ the Power/weight Ratio is quiet low 0.64hp/kg.
The build is 140kg
So i'm limited to 90hp. Today the engine is 81hp at 11krpm.
I use a Racepro 150 kit for twin.
So i'm wondering if it's possible to get a lot of torque with the nitrous and staying under the 90hp?
The torque curve is falling from 7krpm
Thanks