NITROUS OXIDE ( nos / n2o ) advice forum

Ok I hope you like these figures
843 bhp @ 6500 rpm
729 lbtq @ 5200 rpm
With only 28 degree of timing. We only managed a couple of runs as the new volleys I fitted tuned out to be the wrong ones and started to come out so we called it a day. Pete dyno guy said we could be pushing around 890 with a few more revs and a bit more timing. I'll post the dyno sheets later

Superb, I assume these are N/A figures

That was N/A and with cheap petrol we never got to put the V power or any additives so well happy

We had a couple of problems on the Dyno nothing major but problems all the same. Its turned out that the new valve locks that I got aren't compatible for my heads. So we only mananged to do 3 pulls. these were all done on cheap petrol from Tesco to get a base. and at 25* timing.
We achieved a best of
843 bhp @ 6600 RPM
729 lgtq @ 5800 RPM