| NITROUS OXIDE ( nos / n2o ) advice forum http://nitrous-advice.org/ |
|
| Rons 2011 dyno session http://nitrous-advice.org/viewtopic.php?f=18&t=5701 |
Page 1 of 1 |
| Author: | insaneron [ Fri Jan 28, 2011 6:29 pm ] |
| Post subject: | Rons 2011 dyno session |
Ok I hope you like these figures 843 bhp @ 6500 rpm 729 lbtq @ 5200 rpm With only 28 degree of timing. We only managed a couple of runs as the new volleys I fitted tuned out to be the wrong ones and started to come out so we called it a day. Pete dyno guy said we could be pushing around 890 with a few more revs and a bit more timing. I'll post the dyno sheets later |
|
| Author: | BMW840 [ Fri Jan 28, 2011 6:32 pm ] |
| Post subject: | Re: Rons 2011 dyno session |
Superb, I assume these are N/A figures |
|
| Author: | insaneron [ Sat Jan 29, 2011 1:24 am ] |
| Post subject: | Re: Rons 2011 dyno session |
That was N/A and with cheap petrol we never got to put the V power or any additives so well happy |
|
| Author: | insaneron [ Sat Jan 29, 2011 5:52 pm ] |
| Post subject: | Re: Rons 2011 dyno session |
We had a couple of problems on the Dyno nothing major but problems all the same. Its turned out that the new valve locks that I got aren't compatible for my heads. So we only mananged to do 3 pulls. these were all done on cheap petrol from Tesco to get a base. and at 25* timing. We achieved a best of 843 bhp @ 6600 RPM 729 lgtq @ 5800 RPM  
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|