Soon to be fitted
Need:
Bottle heater, BIGGER JETS
wooo
And this shall be in soon
| NITROUS OXIDE ( nos / n2o ) advice forum http://nitrous-advice.org/ |
|
| Citroen Saxo http://nitrous-advice.org/viewtopic.php?f=28&t=4683 |
Page 1 of 1 |
| Author: | DusheR [ Tue Sep 01, 2009 10:04 am ] |
| Post subject: | Citroen Saxo |
Soon to be fitted Need: Bottle heater, BIGGER JETS wooo And this shall be in soon
|
|
| Author: | Noswizard [ Tue Sep 01, 2009 12:39 pm ] |
| Post subject: | Re: Citroen Saxo |
Looking good. 
|
|
| Author: | rapidblue [ Tue Sep 01, 2009 7:45 pm ] |
| Post subject: | Re: Citroen Saxo |
Nice - stealthy install
|
|
| Author: | DusheR [ Wed Sep 09, 2009 4:43 pm ] |
| Post subject: | Re: Citroen Saxo |
new toys 
|
|
| Author: | DusheR [ Tue May 11, 2010 5:42 pm ] |
| Post subject: | Re: Citroen Saxo |
Moved my inline valve...   Comments? |
|
| Author: | Noswizard [ Tue May 11, 2010 7:06 pm ] |
| Post subject: | Re: Citroen Saxo |
Is the pipe inside the car, if so then it's
|
|
| Author: | DusheR [ Tue May 11, 2010 11:00 pm ] |
| Post subject: | Re: Citroen Saxo |
Yes Just above the carpet for now. Need to remove the carpet to get it under  tried pulling the line through but it wont. Oh well, that will do for now!! TPS and MiniMax coming soon... going to try 75
|
|
| Author: | Sam_Ax [ Wed May 12, 2010 7:04 pm ] |
| Post subject: | Re: Citroen Saxo |
Looking very good mate, are you now running the vts engine. Im looking to be running a 75 shot in my vts this sat at santa pod hope its going to be ok 
|
|
| Author: | DusheR [ Fri May 14, 2010 5:02 pm ] |
| Post subject: | Re: Citroen Saxo |
naaa still the tappety 8v waiting the head to come back from a mate then its getting built and dropped in. Hopeing to be camming it with a standalone management next year. The one Im looking at has switchable maps, so two maps for nitrous on/off
|
|
| Author: | ben_r1 [ Sat May 15, 2010 3:29 pm ] |
| Post subject: | Re: Citroen Saxo |
That inline valve is a fantastic idea, could keep my bottle open all day with the heater on for ease of use  What sort of disadvantage will this give through phase change though? |
|
| Author: | Noswizard [ Mon May 17, 2010 10:24 am ] |
| Post subject: | Re: Citroen Saxo |
Minimal as the bore is as close to the pipe bore size as possible and its a straight flow path. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|