NITROUS OXIDE ( nos / n2o ) advice forum http://nitrous-advice.org/ |
|
BMW 330 coupe setup fitted http://nitrous-advice.org/viewtopic.php?f=28&t=6128 |
Page 1 of 1 |
Author: | Autosri [ Wed Aug 03, 2011 12:22 pm ] |
Post subject: | BMW 330 coupe setup fitted |
Been looking into nitrous for a bit and asking questions on here eventually I got a kit from a friend who the wizard may know I also bought some faulty max extreme boards snd have got one working Here is the bottle fitted in the boot and it looks tiny lol Pulsoids are mounted in a big gap in the engine bay out of site The single crossfire nozzle is really the only noticeable part in the engine bay really Lastly the max controller but that's not staying there the main board with the wired coming off is going behind the glove box out of site and I'm extending the wires to the screen and buttons to a separate box that will be 120mmx80mm so kind of a remote control which will go in the drives side cubby hole Hope you all like and the wires in the engine bay are getting covered in convoluted tube to tidy up even more |
Author: | Grimmjar [ Wed Aug 03, 2011 7:31 pm ] |
Post subject: | Re: BMW 330 coupe setup fitted |
Needs more bottles in the boot and more Pulsoids in the front What size Bottle is it? Thomas |
Author: | teddybare [ Wed Aug 03, 2011 7:59 pm ] |
Post subject: | Re: BMW 330 coupe setup fitted |
Got mine sideways for those tesco days.... |
Author: | Autosri [ Wed Aug 03, 2011 9:48 pm ] |
Post subject: | Re: BMW 330 coupe setup fitted |
I know I do it's only a 5lb one so might see if I can find a matching one or get an 11lb one and cus it's my first nitrous setup I wanted to keep it simple but eventually I would like 3 pairs of pulsoids and some vee blocks and go dp I wasnt sure If I could mount it side ways like that because of the dip tube in the bottle and I didn't realise you had an e46 mate |
Author: | teddybare [ Wed Aug 03, 2011 10:17 pm ] |
Post subject: | Re: BMW 330 coupe setup fitted |
I have a newer WON bottle bracket now, looks a little neater ,aslong as you turn the bottle outlet about 5 oclock as you view the top of the valve all is fine in transverse mode...i was going to try a small bottle inside with me, untill i had the olive slippage thing and the pipe blew off.. my boot ended up like a polar bears den , so i dont think i will bother having it inside with me |
Author: | Autosri [ Wed Aug 03, 2011 10:48 pm ] |
Post subject: | Re: BMW 330 coupe setup fitted |
I had the exact same thing happen on my first bottle before I even got to static testing and I though **** am I having that near me |
Author: | Noswizard [ Thu Aug 04, 2011 9:14 pm ] |
Post subject: | Re: BMW 330 coupe setup fitted |
Is the Crossfire actually mounted in that picture, because if it is it doesn't 'appear' to be correct and won't perform correctly. Remind me to check up on a case for you. |
Author: | Autosri [ Thu Aug 04, 2011 10:25 pm ] |
Post subject: | Re: BMW 330 coupe setup fitted |
Yeah the cross fire is fitted to the lower pipe I used the smaller spacer and the plastic lock nut on the inside What looks incorrect and I will check it and I will try and get a better pic tommorow but it's quite awkward to get to for decent photo If you can find a case that would be ideal and will probably pick it up next week as I spoke to one of your lads today about getting it checked over and setting it up correctly |
Author: | Autosri [ Thu Aug 04, 2011 10:40 pm ] |
Post subject: | Re: BMW 330 coupe setup fitted |
found a picture its mounted into part 6 on the highest part i thing there were a few threads showing on the inside of the tube so the outlet ports are probably 6mm from the edge and its rotated slightly off centre http://www.realoem.com/bmw/showparts.do ... g=15&hl=14 |
Author: | Autosri [ Fri Aug 19, 2011 8:45 pm ] |
Post subject: | Re: BMW 330 coupe setup fitted |
Couple of new pics I swapped the pulsoids upside down and it looks better IMO and it's easier to work on Got my bottle gauge and upgraded to 5mm pipe from bottle to pulsoid |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |