NITROUS OXIDE ( nos / n2o ) advice forum http://nitrous-advice.org/ |
|
AX GT 1.6 turbo with DP WON http://nitrous-advice.org/viewtopic.php?f=28&t=6337 |
Page 1 of 1 |
Author: | tweqd [ Sat Nov 19, 2011 9:08 pm ] |
Post subject: | AX GT 1.6 turbo with DP WON |
ive yet to get the bottle filled (nowhere close sells it) but the aim was to get the car running then start adding gas anyway heres my little AX, not much left thats standard id like shorter pipe lengths but these are are short as i can get them i know the pulsoids should not be on the bulkhead but i fi put them anywhere else the pipe lengths will be way too long, i have thought of running some ducting from the headlight to cool them while on the move |
Author: | Noswizard [ Sat Nov 19, 2011 9:21 pm ] |
Post subject: | Re: AX GT 1.6 turbo with DP WON |
If you replaced the D-blocks with our Y-Blocks, you could achieve shorter pipe lengths (as well as reduced volume) and a neater look. Maybe you could then mount the Pulsoids where you currently have the D-blocks. |
Author: | Sam_Ax [ Sat Nov 19, 2011 9:26 pm ] |
Post subject: | Re: AX GT 1.6 turbo with DP WON |
Cant wait to see this at pod, looks like ill be getting knocked off the ax 1/4mile top spot soon then lol, but mite give me the motavtion to turbo mine |
Author: | tweqd [ Sat Nov 19, 2011 9:36 pm ] |
Post subject: | Re: AX GT 1.6 turbo with DP WON |
thansk trevor, do the Y blocks have 4 outlets so i can straight swap them with the D blocks and sam i also have a 16v head im working on and a 6 speed gearbox |
Author: | mgbv8 [ Sat Nov 19, 2011 10:39 pm ] |
Post subject: | Re: AX GT 1.6 turbo with DP WON |
OH MY!!! What a nice job that is |
Author: | dinor5 [ Tue Dec 06, 2011 10:15 am ] |
Post subject: | Re: AX GT 1.6 turbo with DP WON |
looks sweet |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |