| NITROUS OXIDE ( nos / n2o ) advice forum http://nitrous-advice.org/ |
|
| Injectors http://nitrous-advice.org/viewtopic.php?f=4&t=3569 |
Page 1 of 1 |
| Author: | T.F.S. [ Tue Feb 08, 2005 11:07 am ] |
| Post subject: | Injectors |
Injectors The Crossfire injector is the only injector that has three outputs...one for the fuel (middle outlet) and two either side that "cross" the path of the fuel to achieve a vortex effect! all other injectors use negative pressure to pull the fuel out of the injector into the stream of nitrous but compared to the Crossfire it is not exactly efficent! Other types of injectors use a "tube" inside the injector that can crack and leak nitrous into your fuel line...a costly and often terminal failure from a cheap part, a Crossfire will NEVER do this...the design just does not allow for this to happen! The Crossfire ensures full mixing of the nitrous and fuel at the injection point and unlike any other injector the vortex effect that it makes will still help the nitrous and fuel mix even when the mixture has travelled down the inlet away from the the injection point The other plus point is that this is one of the only injectors in production that will flow up to and above 200bhp!, have your cake and eat it! If it aint a Crossfire it aint mixed right!! |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|