First post, second time nitrous user
Trevor might know me from the highpower challenge we raced in for a short time, John's brother with the yellow and red Sierra back in the nineties.
I have a couple of WON nitrous kits that I am trying to put together one full kit for my MR2, I have the following setup
2 x 11 lb bottles in the boot, balance pipe in braided between the two
1 pair of pulsoids mounted on boot side of firewall in cool location with 4 mm nylon going through bulkhead to the cross fire injector
T Piece with threaded connector from the fuel line in between the fuel filter and injector rail
Arming switch in cabin and microswitch on throttle.
Only problem is I have an order pending with the bits I need to finish it but I need to know how to connect the Fuel T Piece to the 5 mm Nylon going to the fuel pulsoid (are the items with the red caps the right things)
And how to connect the blue threaded T Piece from the braided balance pipe between the bottles to the other nitrous Pulsoid
The blue threaded T Piece looks like it has 10 mm threads, not very good with imperial or AN!
I have attached photos to try and help explain