NITROUS OXIDE ( nos / n2o ) advice forum

Wire up the TPS the same as the new digital units as shown here;

http://www.pdfdownload.org/pdf2html/vie ... ctions.pdf

For setting up purposes leave the pink wire disconnected and then turn the ignition switch on (without starting the car) and arm the nitrous system.

Plant your foot to the floor and then adjust the potentiometer until the LED either lights up or just goes out - depending on how the adjuster is originally positioned.

Once you have the adjustment in the right ball park, adjust the setting so the LED comes on when the throttle is operated to say approx. 90% of full travel.

Connect the pink wire and test that operating full throttle activates the system.

Thanks for describing connection details and these led lights are highly effective.

Hi Trev

This is weird...I am sure I am missing something here about this post...

Maybe I am just getting old lol...

All the best Brett

Strange but as we're both missing it, I'd say we're OK.

Hi Trev

Maybe its just my age lol

All the best Brett

Hi

Unless.......................was this bit >>>>> and these led lights are highly effective. <<<< meant to be spam of some sort ?

All the best Brett

defo spam. he has another post here somewhere on the same lines.